Re: Sport Sedan / Milano Interior

["Daegrigg (Don)" <daegrigg@domain.elided>]

Craig,

Height is not a problem.  I had a similar reaction when I saw the Milano
seats, but the seats in the sedan sit on a raise portion of the floor,
making the finished height pretty much the same as the original seats.

It is a bolt right in deal.   Even the mounting holes for the rear seat are
the same.  You do have to use the original sedan seat belt female (floor)
connectors.  Removal of the Milano belt that is anchored to the seat is just
one 17 mm bolt.

I have seats from a Silver which are cloth.. I don't know if there would be
a clearance problem for the power seats - probably isn't.

Hope this helps.

Don

----- Original Message -----
From: "Craig Wilson" <sptsdn@domain.elided>
To: <daegrigg@domain.elided>
Sent: Thursday, September 26, 2002 1:00 PM
Subject: Sport Sedan / Milano Interior


> Don:
>
> Congratulations on finding an interior.  Could you answer a few questions
> for me about it?
>
> I was considering replacing the seats in my 78 Sedan with those of a
> Milano's until I sat in the Milano.  I don't like how low I sit in the
> Milano (non Recaro versions).  I feel like I sit rather high in the Sport
> Sedan and was concerned that if I replaced the seats I would be sitting
> rather low.  Have you noticed a difference?  Can you tell if it it the
seat
> or the mount that makes the Milano seats lower?  How easy was the change;
> bolt-in or were some adjustments needed?
>
> Thanks in advance,
> Craig
> 78 Sport Sedan
>
> >>>>>>>>>>>>>>>
> Also,  thanks to those who suggested Milano seats for the Alfetta.  A
local
> club
> member donated a complete front/back set and they do fit!
>
> Thanks,
>
> Don
>
>
> _________________________________________________________________
> Send and receive Hotmail on your mobile device: http://mobile.msn.com
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided