Fw: Lube Clutch Pivot Arm? 2nd Try

["Daegrigg (Don)" <daegrigg@domain.elided>]

----- Original Message -----
From: "Daegrigg (Don)" <daegrigg@domain.elided>
To: "michael hazarian" <haz@domain.elided>
Sent: Sunday, August 25, 2002 8:42 PM
Subject: Re: Lube Clutch Pivot Arm? 2nd Try


> The lubricant called for in the manual is AGIP Grease 33  or Shell Retinax
> AX.
>
> Don
> ----- Original Message -----
> From: "michael hazarian" <haz@domain.elided>
> To: "jason.glover" <jason.glover@domain.elided>; "alfa digest.net"
> <alfa-digest@domain.elided>
> Sent: Sunday, August 25, 2002 2:25 PM
> Subject: Re: Lube Clutch Pivot Arm? 2nd Try
>
>
> > OK, since no one else will reply, I'll give it a shot. I like to use
white
> > lithium grease for any clutch or brake related lubrication needs. Try
not
> to
> > over do it as you don't want any excess grease floating around any
> friction
> > surfaces.
> >
> >
> > Michael Hazarian
> > Rx Productions
> >
> > On 8/25/02 9:14 AM, "jason.glover" <jason.glover@domain.elided> wrote:
> >
> > > Does anyone know what type of grease one is supposed to lube the
clutch
> > > pivot arm on a 70's Spider. What was under the little rubber boot
inside
> > > the bell housing looked like rusty chewing gum. Also do you need to
> > > grease the throwout bearing where it slides on the steel tube?
> > --
> > to be removed from alfa, see /bin/digest-subs.cgi
> > or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided