Removing Rear Brake rotors on spider?

[Kevin Trent <trentkc@domain.elided>]

Thanks to tips from the digest, I've confirmed that the passenger side 
wheel bearing needs replacement on my '73 spider.   The first step is to 
remove the brake rotor, but the darn thing is stuck on the axle hub.

I've removed the brake caliper, completely backed off the emergency brake 
shoes on that side, and removed the two screws that hold the brake disk to 
the axle hub.

Any tricks to get that **** thing off?  I've applied lots of penetrating 
oil at the studs and screw holes.  This is not the first time I've done 
this repair, and had trouble getting the rotor off the last time. If I 
recall correctly, I ended up bending the rotor through the various 
machinations in getting it off.

So far, I've not really bashed the crap out of it with a sledge 
hammer...yet.  Seems like a slide hammer type tool would work.  tips??

Thanks, // kct, Powell, TN
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided