Fwd: Tube chassis

[AlfaR7@domain.elided]

In a message dated 1/17/2002 10:57:55 AM Central Standard Time, Alfa R 7 
writes:


> Since buying the new race car, the tube chassis I have been working on for 2 
> years has to go. I`m finishing this season with the Alfa GT-2 car and will 
> be preping the new car for 2003. For $1000.00 you get the following, but it 
> has to be got from here QUICK! 
> 
> Tube frame chassis built by Rabbit Davis.  Chassis is 1.625 DOM .095 with 
> Roll hoop 1.625 with .120 wall.  Origionally to be bodied with late Pontiac 
> Sunfire body. Shortened to 96 inch wheelbase, and Adapted to Alfa DeDion 
> rear suspension which is located via heim joints & rod ends. with Gearbox 
> with clutch, brake shifter (alfetta) with fabricated shift assembly in car 
> (out of parts car). Front is long  arm  lower with forward arm with rod 
> ends. Uppers are AFCO A arms. # sets (two steel, one alum) spindles are 
> ford with new hubs, 4 on 4.25 bolt circle. (Also have DeDion hub centers 
> modified to same bolt circle)  Spindles have brake mounting plate for 
> Wildwood Dynalite Brakes.
> Has 2.5 liter Alfa V6 hard mounted(motor not complete) in chassis. From 
> bottom of chassis to highest point is 41 inches.  Would be easy to convert 
> to stright rear axle if for different application.  With Eng. & 
> transaxle/DeDion installed I can pick up Front & rear, (not at same time, 
> I`m old) as assembled it all  weighs about 880-900 lbs.
> Bolt on wheels & it will roll. Not included.
> Also have Tilton pedal assembly, 3 MC`s in box, Brakes, Front & rear tube 
> sway bars and alum arms,and Carrera Coil overs for rear, but they will be 
> extra $ . These have been fitted however to chassis. 
Return-path: <AlfaR7@domain.elided>
From: AlfaR7@domain.elided
Full-name: Alfa R 7
Message-ID: <88.126664fc.29785c93@domain.elided>
Date: Thu, 17 Jan 2002 11:57:55 EST
Subject: Fwd: Tube chassis 
To: alfaracing@domain.elided, alfa-digest@domain.elided
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailer: AOL 7.0 for Windows US sub 118
X-Converted-To-Plain-Text: from multipart/mixed by demime 0.98e
X-Converted-To-Plain-Text: Alternative section used was text/plain

Return-path: <AlfaR7@domain.elided>
From: AlfaR7@domain.elided
Full-name: Alfa R 7
Message-ID: <4e.512e508.2978538a@domain.elided>
Date: Thu, 17 Jan 2002 11:19:22 EST
Subject: Tube chassis 
To: alfa-digest@domain.elided alfaracing@domain.elided
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
X-Mailer: AOL 7.0 for Windows US sub 118

Since buying the new race car, the tube chassis I have been working on for 2 
years has to go. I`m finishing this season with the Alfa GT-2 car and will be 
preping the new car for 2003. For $1000.00 you get the following, but it has 
to be got from here QUICK! 

Tube frame chassis built by Rabbit Davis.  Chassis is 1.625 DOM .095 with 
Roll hoop 1.625 with .120 wall.  Origionally to be bodied with late Pontiac 
Sunfire body. Shortened to 96 inch wheelbase, and Adapted to Alfa DeDion rear 
suspension which is located via heim joints & rod ends. with Gearbox with 
clutch, brake shifter (alfetta) with fabricated shift assembly in car (out of 
parts car). Front is long  arm  lower with forward arm with rod ends. Uppers 
are AFCO A arms. # sets (two steel, one alum) spindles are ford with new 
hubs, 4 on 4.25 bolt circle. (Also have DeDion hub centers modified to same 
bolt circle)  Spindles have brake mounting plate for Wildwood Dynalite 
Brakes.
Has 2.5 liter Alfa V6 hard mounted(motor not complete) in chassis. From 
bottom of chassis to highest point is 41 inches.  Would be easy to convert to 
stright rear axle if for different application.  With Eng. & transaxle/DeDion 
installed I can pick up Front & rear, (not at same time, I`m old) as 
assembled it all  weighs about 880-900 lbs.
Bolt on wheels & it will roll. Not included.
Also have Tilton pedal assembly, 3 MC`s in box, Brakes, Front & rear tube 
sway bars and alum arms,and Carrera Coil overs for rear, but they will be 
extra $ . These have been fitted however to chassis. 

--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided