Re: (Anti-)Swaybars Again

[Alan Lambert <gerard@domain.elided>]

I understand the following to be correct.

22mm= GTV6

24mm= Milano

25.5 mm= late Milano Verde.

I have checked my "oversized" (by Sharol Mehta) front bar on the GTV6, and 
it does measure 25.5mm.


On 12 Feb 2000, Dan Scolaro wrote:

> Hi all,
> 
> Just to add to the confusion, I measured the bars on my 2.5. They measure 22mm front and rear.  Bob Brady and I also measured the front bar on his Verde: 24mm.  The IAP catalog says (on p44) that the front swaybar for all Milanos (2.5 & 3.0) from 88-89 are 24mm, with the special note that you should call for 87 Milano bushings.
> 
> This all leads me to suspect that in 87, 2.5 Milanos had 22mm bars and 3.0 Milanos had 24mm bars.  There was probably some slop in the changeover, with some 2.5's having 24mm bars toward the end of the 87 MY.
> 
> Does that sound plausible?
> 
> Dan Scolaro
> Delaware Valley AROC   www.dvaroc.org
> Phila, PA
> 
> 65 2600 Spider
> 87 Milano Gold
> 91 164
> 
> 
> 
> 

================================================================================
Regards,
Alan G. Lambert___________________________________<gerard@domain.elided>
           *******Los Altos, California (office)*******

------------------------------