Re: #794 -- GTV6 rear brakees; A/C

[richard bies <bies@domain.elided>]

A snap to switch to the Milano compressor.  Make sure you get the Milano
mounting brackets.

- ---------------

If you don't get feeler gagues in there, or the pedal travel is still too
high (the feeler gauges work well only if the rotors and pads are
essentially perfect), rotate the relevant wheel while tightening the pad
- -- from lock-up, back-off slightly so that the wheel will turn fairly
freely.  Four times.  Check again after tightening the outer adjustors.

r.m.bies

------------------------------