Lower ball joints and a-arm bushings

["Roger F. LaFerriere" <rogerlaf@xxxxxxxx>]

If you need lower ball joints AND a-arm bushings it really is best to do =
them at the same time. Not difficult. A-arm bushings can be changed on =
the bench, using a hammer and socket to knock out the old ones. It is =
also convenient to perform a major front brake service and replace front =
stabilizer bar bushings at the same time. Stabilizer bar bushings must =
be replaced using a hydraulic press: no way around it. Broken stabilizer =
bar bolt: drill it out and heli-coil it. What did you hit?
Roger  

------------------------------