Re: 164 Fan Circuit Always Hot

[bjanesi@xxxxxxxx]

 "Rich Lasner" <rlasner@domain.elided> writes...

>While doing some work on the cooling system on my 164S during this
recent
>hot spell, I decided to wire my fan to stay on after shutdown until the
air
>temp sensor on the fan shroud closes it down. .......

I have also done this, but also replaced the radiator, fan, and all the
assorted switches, relays, etc.  I now have a very simple circuit which
picks up the existing harness "+" connection from where the old fan
plugged, and then runs through the variable switch to the fans (2) and
back to ground.  This approach does eliminate the low-speed circuit
engagement when the A/C is turned on, but since I've got the fan switch
set to come on at about 190 F', it works just fine.

Not sure if these helps or not.  BTW, all three items are available from
Tom Zat. 

Brad Anesi
'91 Project 164Q 5-speed

P.S. Modulus guitars?  Anything like a Steinberg?

_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]

------------------------------