RE: [alfa] Re: CarDisc CD manuals

["John Paradiso" <johnp@xxxxxxxxxxxxx>]

I Think that the cardisc only prints to Windows' default printer, so you
need to set the PDF "printer" as your default printer before starting the
cardisc, then change it back when you are done.

John Paradiso
 

>-----Original Message-----
>From: owner-alfa@domain.elided [mailto:owner-alfa@domain.elided] On 
>Behalf Of Gwynne W. Spencer
>Sent: Tuesday, August 03, 2004 12:03 PM
>To: Mitch
>Cc: alfa-digest@domain.elided
>Subject: Re: [alfa] Re: CarDisc CD manuals
>
>I installed Cute PDF and the required Ghostscript execs, then 
>went into 
>printers and set the cutePDF as the default printer, but when 
>I hit the 
>"print"button in the CarDisc program, nothing seems to happen. 
>It never did 
>offer a print setup screen or anything like that. ??
>
>Gwynne Spencer
>
>At 07:43 AM 8/3/2004 -0600, you wrote:
>>>Gwynne W. Spencer wrote:
>>>
>>>"I am trying to find out how the diagrams can be magnified 
>enough to be
>>>able to read the details (such as wire colors, etc.)"
>>>
>>>If you have Adobe Acrobat, the following works:
>>>
>>>1.  Set default printer to Acrobat PDF writer or Acrobat Distiller
>>>2.  Start up the CarDisc reader, go to the page you want to enlarge
>>>3.  Click the print button.
>>>
>>>The page will pop up in the PDF Reader.  You can now zoom in 
>using the
>>>Reader's tools.  This trick is sometimes helpful in 
>clarifying small text.
>>>But, it seems that the images were scanned at a pretty low 
>resolution in
>>>the first place.
>>>
>>>Cheers,
>>>Darryl
>>There are also some free PDF creatorsthat work very well, 
>CutePDF and PDF995.
>>
>>Mitrch Wolberg
>>Denver, CO
>>69 Berlina
>>69 Spider Jr.
>>--
>>to be removed from alfa, see /bin/digest-subs.cgi
>>or email "unsubscribe alfa" to majordomo@domain.elided
>--
>to be removed from alfa, see /bin/digest-subs.cgi
>or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided